Connecting A Tv With Inputs 7 Input, Output Jacks; Cassette Light; Front Panel Display; Rear Panel Jacks - Mitsubishi HS-U449 Owner's Manual

Location of Controls

Front Panel Display

POWER light : PWR.
Is lit when power is ON.
VCR light : VCR
Indicates that the picture is controlled by the VCR.

Cassette light :

Lights up when a tape is in the VCR.
time display
This area displays:
• current time
2
• OTR and OTR timer

Rear Panel Jacks

AUDIO INput and OUTput jacks
Red and white jacks for receiving (IN) and sending
(OUT) audio signals. Red signifies the right
channel, and white signifies the left channel.
Stereo audio cables are also color coded red and
white. If you are receiving or sending a mono
(non-stereo) signal, you should use only the left
(white) terminal.
VIDEO INput and OUTput jacks
Yellow jacks for receiving (IN) and sending (OUT)
video signals to a monitor TV or from another
VCR.
46
PWR. REC
VCR
PM
Record light : REC
Lights up when the VCR is recording.
Flashes when the VCR is in recording pause
mode.
Programmed recording light :
Lights up when VCR is off and it is programmed to
record.
PM light : PM
Lights up when the current time or start time of
OTR
Turns off when it is in the morning.
AUDIO
OUT IN 1
R R
L L/MONO
VIDEO
OUT IN 1
ANTENNA IN jack
Attach an external antenna or cable to bring in an
outside signal.
ANTENNA OUT jack
Attach a coaxial cable to your TV to send out
antenna/cable signals from the VCR to your TV.
2
is in the afternoon.
ANTENNA
IN
OUT