What If I Can't Access The Factory Reset Option; Getting System Updates; Checking For Updates On A Connected Tv; Getting Updates On A Non-Connected Tv - LG 55LF5700 User Manual

What if I can't access the Factory Reset option?

It is possible that your TV might get into a state where you cannot access the various menus, including the menu option
that lets you perform a factory reset operation. If that happens, you can force your TV to reset by following these steps:
1 Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on your TV connector
panel.
2 Continue to hold the RESET button for approximately 15 seconds.
During this time, the status light turns off, and then turns on bright, and then pulses. When the reset cycle
completes, the light either comes on dim (if your TV power was off when you started) or your TV screen comes on
and the light turns off (if your TV power was on when you started).
3 When the status light turns on steady dim or your TV screen comes on, release the RESET button.
4 Proceed through Guided Setup. See

Getting system updates

If your TV is connected to the Internet and linked with a Roku account, it will automatically get updates from time to
time. You don't need to do anything. But if you are aware that an update is available and you don't want to wait until
your TV updates itself, you can manually check for updates.
If your TV is not connected to the Internet, you can still get updates by using a USB flash drive.
You can download an updated User Guide that matches your LG TV powered by Roku TV software version from the LG
web site at:
www.lg.com/us
To determine your current LG TV powered by Roku TV software version, go to Settings > System > About after you
complete Guided Setup.

Checking for updates on a connected TV

If you're one of those people who has to have the latest, most up-to-date gadgets the moment they are available, you
can check for updates as often as you want.
To check for updates, navigate to Settings > System > System update, and then select Check now. Your TV responds
either with a message saying that your TV is up to date, or with a message saying that an update is available.
Follow the instructions on the screen to install the system update.

Getting updates on a non-connected TV

If your TV is not connected to the Internet, you can still get system updates by using a USB flash drive and a computer
with an Internet connection.
To get a system update, navigate to Settings > System > System update:
The System update screen on a non-connected TV gives you the opportunity to connect your TV to the Internet to
automatically receive updates. We recommend this option if it is possible in your situation. To proceed, select Connect
to the Internet and follow the instructions in
64
Setting up your TV on page 32.
But what if I didn't connect my TV?
www.lg.com/us
55"/65" 1080p, 60Hz, LG TV powered by Roku TV
on page 39.