Using Your Lg Tv Powered By Roku Tv; Tv Status Light; Standby Mode Energy Savings; Watching Broadcast Tv Channels - LG 55LF5700 User Manual

55LF5700/65LF5700

Using your LG TV powered by Roku TV

This section provides information on using the day-to-day features of your TV.

TV status light

Your TV has a single status light on the front panel. It goes on and off and blinks in different ways depending on the
status of the TV, as shown in the following table:
TV condition
On (screen is active)
Screensaver (screen is active,
except when the Picture
Mode is set to Power Saver.
Power Saver turns off the
backlight.)
Off (no power)
Off (standby)
Starting up from off state
On (receiving update from
USB)
Remote control command
received
Powering down to standby
mode

Standby mode energy savings

About 10 minutes after you turn off your TV, it goes into a very low power standby mode. Until that happens, if you turn
on your TV again, it immediately displays the activity you selected in the Power on settings, as described in
settings on page 54. After your TV goes into the low power standby mode, it takes a bit longer to start up.

Watching broadcast TV channels

To watch broadcast TV, select the Antenna TV tile in the Home screen. Your TV remembers the last channel you
watched and starts with that channel playing.
Tip
You also can use the buttons on the TV panel to select Antenna TV, as explained in
Buttons

Changing channels

To change channels, you can do any of the following:
• Press UP to change to the next higher channel.
• Press DOWN to change to the next lower channel.
• Press LEFT to display the channel list, and then press UP or DOWN to move the highlight through the list one channel
at a time. Or press REWIND and FAST FORWARD to move the highlight through the list one page at a time. When
you've highlighted the channel you want to watch, press OK. (If you decide you don't want to change channels, press
RIGHT or BACK).
• Press to switch to the previously tuned channel.
Note
If
or the Jump Back button on a universal remote. For more information, see
devices
Status indicator
Off
Off
Off
On
Slow pulsing blink until
startup completes
Slow pulsing blink until
update completes
Dims on/off once
Slow pulsing blink until
the TV reaches standby. Your TV is doing something.
on page 10.
is not available on your remote control, you can use
on page 65.
Meaning
Screen is communicating that your TV is
on.
Screen is communicating that your TV is
on.
Your TV is not connected to power.
Your TV is connected to power and ready
to use.
Your TV is doing something.
Your TV is doing something.
Your TV has received your command.
www.lg.com/us
on the Roku mobile app
Other
Power on
43