Assembling The Aircraft - Sapac TL 2000 Operation And Assembly Instructions

OPTINAL EXTRA FLOATS

ASSEMBLING THE AIRCRAFT

Before starting, cover your work top with something soft like a bath towel so that the fragile surface of the model does not
get damaged while you are working on it. Additionally, if you obtain a polystyrene box from your greengrocer and cut a
semi-circular hole in the opposite ends, it will make a useful stand on which to securely rest the model.
CAUTION! To avoid damage, do not connect the battery before you finish the assembly.
INSTALLING MAIN WING
Take one of the wing panels and feed aileron servo wire in to the fuselage and connect to Y lead.
Now give the wing root and fuselage a coat of the provided glue. Slide it on to the fuselage and hold with tape till dry.
TIP: We recommend using Epoxy or CA glues as they are generally more reliable than a contact type
glue. If using contact glue supplied, apply to both surfaces then let dry till tacky then fit parts
together.
INSTALLING STABILIZER
4