Connection Diagram - Cablesson HDelity User Manual

CONNECTION DIAGRAM

Cablesson HDelity 8X8 MATRIX
Cablesson HDElity 8x8 CAT5/6 HDMI Matrix
Power Cable
HDMI Cable
CAT Cable
3rd Party
Control Systems.
IR Cable
HDMI IN 1
HD Source 1
X-box 360/Wii
HDMI IN 2
tv DC Power
Adapter
HD Source 2
Apple TV
HDMI IN 3
HD Source 3
Blue-ray Player
HDMI IN 4
Any HD Source 4
Sky HD
HDMI IN 5
Surround Sound
Audio Receiver System
HDMI IN 6
Camcorder/
Digital Camera
HDMI IN 7
MUSIC SYSTEM
HDMI IN 8
PS 3
tv
9 | Connection Diagram
IR Remote
OFF ON
F1 F2
PRESET F3 F4 SAVE
SWITCH
1 2 3
DEFAULT
EDID
4 5 6
LEARN
7 8 9
To +10 TAKE ALL
CLEAR MUTE STATUS
- OUTPUT OUTPUT +
- INPUT INPUT +
LCD/LED LCD/LED LCD/LED LCD/LED LCD/LED LCD/LED LCD/LED LCD/LED
Display Device Display Device Display Device Display Device Display Device Display Device Display Device Display Device
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
HDMI Receiver HDMI Receiver HDMI Receiver HDMI Receiver HDMI Receiver HDMI Receiver HDMI Receiver HDMI Receiver
Front View
Back View
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7
LCD/LED LCD/LED LCD/LED LCD/LED LCD/LED LCD/LED LCD/LED
Display Device Display Device Display Device Display Device Display Device Display Device Display Device
METHOD A: PUSH-IN BUTTON
Front
1. IN/OUT Map
A. Use the "+" or "-" output push button to select the number of display
B. Use the "+" or "-" input push button to select the number of input source:
"+": change selected input/output port in ascending order
"-" : change selected input/output port in descending order
After you select the desired input/output port, the LED will blink twice and setting will be effective.
2. Save Mapping Mode
A. Keep pushing "Output+(Save)" button until the output LED shows "D." to enter the Save Mapping Mode
B. Use the "+" or "-" input push button to select the mapping configuration (0~7) which you want to save
current input/output mapping
C. After you select the desired mapping configuration number, the LED will blink twice and the mapping
setting will be saved.
D. If you push the "Output-(Preset)" button before the mapping setting is saved, the LED will show "一""一" to
quit the Save Mapping Mode.
OUT 8
3. Preset Mapping Mode
A. Keep pushing "Output-(Preset)" button until the output LED shows "P." to enter the Preset Mapping Mode
LCD/LED
Display Device
B. Use the "+" or "-" input push button to select the saved mapping configuration (0~7) which you want to
recall
C. After you select the desired mapping configuration number, the LED will blink twice and the mapping
setting will be effective.
D. If you push the "Output+(Save)" button before the mapping setting is effective, the LED will show "一""一"
to quit the Preset Mapping Mode.
Preset - OUTPUT OUTPUT +
+ INPUT INPUT +
Learn
Save
Default
10 | Operational Approach