Table of Contents
Advertisement
METHOD C: SOFTWARE CONTROL THROUGH RS-232 PORT
7.
Firmware Update Button
A.
Click "Load File" to select the firmware file which you want to update
B.
Click "Break" button
C.
Quickly remove and reconnect the power input connector
D.
Click "Start" button to begin the firmware update
8.
Network Button
19 | Operational Approach
METHOD C: SOFTWARE CONTROL THROUGH RS-232 PORT
A.
Click "Read From Device" to read the device IP address
B.
Select "Ethernet" and then will be a pop-up windows
C.
Key in the device IP address to the pop-up windows
D.
Close the pop-up windows
E.
Click the connected button to connect
9.
Mapping Button
A.
Save Mapping
a) Select mapping 1-8
b) Click "Save" button to save current mapping
B.
Preset Mapping
a) Select mapping 1-8
b) Click "Recall" button to recall previous mapping which are saved
C.
Rename Mapping
a) Rename mapping 1-8
b) Click "Confirm" button to confirm the change
20 | Operational Approach
Advertisement
Table of Contents
