Table of Contents
Advertisement
PANEL DESCRIPTIONS FOR TRANSMITTING UNIT
1.
Source Status: Input source indicator LED
2.
IR Sensor IR Sensor for receiving the IR commands from IR Remote
3.
Output Push Button & 7-segment LED: Front panel push buttons used to select the number of display channel
& LED display for output ports
4.
Input Push Button & 7-segment LED: Front panel push buttons used to select the number of input source &
LED display for input channels
9
8
10 11
RS-232
SYSTEM IR Receiver
ALL IR Blaster
1
2
3
4
5
6
7
8
1
2
3
4
5
+ 12V DC
SYSTEM
ALL
IR Receiver
IR Blaster
HDMI IN 1
HDMI IN 2
HDMI IN 3
HDMI IN 4
HDMI IN 5
HDMI IN 6
HDMI IN 7
Ethernet
5
7
6
5.
+12V DC: 12V DC power jack
6.
Ethernet: Ethernet control port
7.
INPUT 1-8: HDMI inputs
8.
RS-232: RS-232 control port
9.
IR Receiver 1-8: Infrared 3.5mm socket for plugging in the extension cable of IR Receiver
10. System IR Receiver: Ext. IR Receiver
11. All IR Output: 3.5mm IR Blaster socket for HDMI source control on all 8 inputs
12. IR Blaster 1-8: 3.5mm IR Blaster socket for individual HDMI source control
13. Output Port 1-8: RJ-45 & local loop-out HDMI outputs for each output channel
5 | Description
3
- OUTPUT
OUTPUT +
- INPUT
INPUT +
1
4
2
Front Panel
12
6
7
8
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
OUTPUT 5
OUTPUT 6
OUTPUT 7
HDMI IN 8
13
Rear Panel
PANEL DESCRIPTIONS FOR RECEIVING UNIT
1.
HDMI Output: Connect to HDTV with HDMI cable
2.
Cat In: Plug-in CAT.X cable
OUTPUT 8
HDMI OUT
1
CAT IN
2
6 | Description
Advertisement
Table of Contents
