Table of Contents
Advertisement
METHOD C: SOFTWARE CONTROL THROUGH RS-232 PORT
1
6
7
8
11
1
FW/SW Version Button
7
2
COM Port Selection
8
3
Connection Status
9
4
Connect/Disconnect Button
10
5
Power On/Off Button
11
6
EDID Button
12
1.
Click "
" button to show version information
?
15 | Operational Approach
4
2
3
9
10
12
Firmware Update Button
Network Button
Mapping Button
Default Reset Button
In/Out Switch Button
Mute Output Button
METHOD C: SOFTWARE CONTROL THROUGH RS-232 PORT
2.
COM Port Selection
5
Click "
" button to select COM Port
3.
Connection Status
A) Connected Status:
Connected
B) Connecting Status:
Connecting
C) Disconnected Status:
Disconnected
4.
Connect/Disconnect Button
Click this button "
" to change
connection status
5.
Power ON/OFF Button
Click this button to ON/OFF the
power
"
" Power ON Status (Blue)
"
" Power OFF Status (Red)
6.
EDID Button
A.
Learn EDID from Default
a) Select Default EDID (1-8 default EDID)
b) Select Input
c) Click "Learn" button to Learn Default EDID
Disconnected
Disconnected
Disconnected
16 | Operational Approach
Advertisement
Table of Contents
