Mitsubishi Electric XD435U-G User Manual page 18

Menu operation (continued)
Basic operation
Several settings can be adjusted using the menu. OFF.
Example : Auto power off time setting
1. Press the MENU button.
opt.
IMAGE
2. Press the or button to select INSTALLATION.
opt.
INSTALLATION
3. Press the ENTER button (or
opt.
INSTALLATION
AUTO POWER
ON
AUTO POWER
OFF
1 IMAGE
CONTRAST ................................................Use to adjust the image contrast. The contrast becomes
BRIGHTNESS.............................................Use to adjust the image brightness. The image becomes
WHITE ENHANCE......................................Use to adjust the white level of the projected image.
COLOR TEMP. ...........................................Use to adjust the color temperature. See page 21.
COLOR .......................................................Use to adjust the color intensity of the image.
TINT ............................................................Use to adjust the color balance of the image. The color
SHARPNESS..............................................Use to adjust the image sharpness. The image becomes sharp as the value increases. (Not available
GAMMA MODE ..........................................When AUTO is selected, the appropriate gamma mode is automatically selected depending on the
2 INSTALLATION
AUTO POWER ON .....................................When ON is chosen, the lamp is automatically lit when
AUTO POWER OFF....................................Use to set the time elapsed before the projector enters
SPLASH SCREEN......................................Choose ON to display the splash screen when the power
BACK COLOR.............................................Use to select the background from among BLUE and
LAMP MODE ..............................................Use to change the brightness of the lamp. When LOW is chosen, the lamp brightness is kept low and
IMAGE REVERSE ......................................Use to reverse the projected image. Select MIRROR for rear projection with the tabletop-mounted
EN-18
XGA60
XGA60
button).
XGA60
OFF
OFF
higher as the value increases.
brighter as the value increases.
Select AUTO for normal use.
balance shifts to green as the value increases and shifts
to purple as the value decreases. (Available only when
VIDEO or S-VIDEO is chosen as the source.)
• When the TV50 (PAL, SECAM) signal is input, TINT
can't be adjusted.
with certain signals.)
input signal. For normal use, select AUTO. Select DYNAMIC for computer sources. Select STAN-
DARD for sport scenes and video sources. Select THEATER for film sources.
the power cord is plugged in the wall outlet. Choose ON
when using the projector mounted on the ceiling.
• The projector is in the stand-by mode when the lamp
is off. Use the remote control to turn on the lamp.
the stand-by mode when there is no signal input from the
source.
is turned on.
BLACK, which will be displayed when there is no signal input from the source.
the projector operating noise is reduced, resulting in a longer lamp replacement interval.
• When the lamp mode is switched, the projected image may flicker. This is not a product malfunc-
tion.
• Do not change the setting of LAMP MODE frequently.
• When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW
about one minute after turn-on.
projector. Select MIRROR INVERT for front projection with the ceiling-mounted projector.
4. Press the or button to select AUTO POWER OFF.
AUTO POWER
ON
AUTO POWER
OFF
5. Press the or button to adjust the auto power off time.
AUTO POWER
ON
AUTO POWER
OFF
6. Exit the menu by pressing the MENU button several times.
Important:
• When the button doesn't function, unplug the power cord from the
wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
• After selecting the items marked with
ton.
IMAGE
INSTALLATION
OFF
OFF
OFF
30 min
, press the ENTER but-
opt.
XGA60
CONTRAST 0
BRIGHTNESS 0
WHITE ENHANCE AUTO
COLOR TEMP. STANDARD
COLOR 0
TINT 0
SHARPNESS 0
GAMMA MODE AUTO
opt.
XGA60
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
SPLASH
ON
ON
SCREEN
BACK COLOR BLUE
LAMP MODE STANDARD
IMAGE
OFF
REVERSE