Table of Contents
Advertisement
1
Press [CLOCK/TIMER] repeatedly to select the timer
function.
CLOCK
]
Original display
# PLAY : to set the play timer
# REC : to set the record timer
(Proceed to the next step within 8 seconds )
2
Press [R/T] to set the starting time.
Play timer indicator
3
Press [OK] to confi rm.
4
Repeat steps 2 and 3 to set the fi nishing time.
5
Press [R/T] to select the desired source for play timer or
record timer.
6
Press [OK] to confi rm.
For play timer proceed to step 9.
For record timer continue from step 7 onward.
7
Press [R/T] to select the desired recording storage
location.
8
Press [OK] to confi rm.
To activate the timer
9
Press [# PLAY/REC] repeatedly to turn on your desired
timer.
# PLAY
10
Press [`] to turn off the unit.
The unit must be turned off for the timer to operate.
Change the
Repeat steps 1 to 8 and 10 (Z see above).
settings
Change the
1) Press [# PLAY/REC] to clear the timer
volume
indicator from the display.
2) Make changes to the volume.
3) Perform steps 9 and 10.
Check the
Press [CLOCK/TIMER] repeatedly to select
settings
# PLAY or # REC.
Cancel
Press [# PLAY/REC] to clear the timer
indicator from the display.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning,
the fi nish time setting will not be activated.
AKX50_GN_EN.indd 15
AKX50_GN_EN.indd 15
# PLAY ]
# REC
Start time
Record timer indicator
Finish time
# REC
No display (off)
Using sound effects
Changing the sound quality: Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY
Adds punch to rock
CLEAR
Clarifi es higher frequencies
SOFT
For background music
VOCAL
Adds gloss to vocal
FLAT
No effect
Changing the sound quality: Manual EQ
1
Press [MANUAL EQ] repeatedly to select your desired
setting.
BASS
For lower pitch sound
MID
For middle pitch sound
TREBLE
For higher pitch sound
2
Press [2/3] or [5/6] to adjust the level.
Note:
• The level of the pitch is between -4 to +4.
• The changes you make are stored and automatically recalled the
next time you select "MANUAL EQ".
Enhancing the stereo sound: SURROUND
sound
Enables you to add natural width and depth to the stereo sound.
To activate
Press and hold [−SURROUND] to display "
indicator.
To cancel
Press and hold [−SURROUND] again to clear "
indicator.
Note:
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the
surround sound effect.
Enjoying the bass: D.BASS
Press [D.BASS] repeatedly to select either "ON D.BASS" or
"OFF D.BASS".
Changing the sound quality: RE-MASTER
This feature reproduces the frequencies lost during recording
(original soundtrack) to give you a sound closer to the original.
Press and hold [–RE-MASTER] repeatedly to select either
"ON RE-MASTER" or "OFF RE-MASTER".
Boosting the super woofer
Press [SUPER WOOFER] repeatedly to select your desired
setting.
OFF
SW1
Note:
This function is not applicable when a headphone is connected.
"
"
SW2
SW3
2/25/2010 10:21:37 AM
2/25/2010 10:21:37 AM
15
Hide quick links:
Advertisement
Table of Contents
