Edit Mode - Panasonic SC-AKX50 Operating Instructions Manual

Play List
You can store up to 10 play lists. Each play list stores up to 99
tracks.
1
Press [4/9, MEMORY] and then [8] (stop).
2
Press [PLAY LIST].
3
Press [R/T] to select the desired play list.
4
Press [OK] to confi rm.
"PL01 EMPTY" is displayed if no track is found in play list
named "PL01".
5
Press [R/T] to select the desired album.
6
Press [Y/U] to select the track.
7
Press [OK] to store the selected track.
8
Press [EDIT MODE] and then repeat step 5 to 7 to store
other tracks.
9
Press [4/9, MEMORY] to start play.
Cancel the play
Press [PLAY LIST] repeatedly until "
list
cleared.
Select other Press [PLAY LIST] and then [R/T] to select
play list the play list.
Add tracks Perform step 8 in the stop mode.
Check contents Press [Y/U] in the stop mode.
of the play list
Clear a single
In the stop mode, press [Y/U] to select the
track desired track you want to clear then press
[DEL], "DELETE?" is displayed. Within 5
seconds, press [OK] to clear the track.
Clear all tracks
Press [8] (clear) in the stop mode, "CLEAR?"
in a play list is displayed. Within 5 seconds, press [OK] to
clear all tracks.
Advanced recording functions
High-speed recording
Recording speed:
CD : Four times (maximum of 4x) the normal speed.
CD-RW : Two times (2x) the normal speed.
1
Insert the disc you want to record.
2
Press [4/9, CD] and then [8] (stop).
To record a specifi c track, press [PLAY MODE] to select
1-TRACK.
3
Press [CD HI-SPEED] and [7/9, USB REC] or
[7/9, MEMORY REC] simultaneously to start recording.
Note:
• Depending on the condition of the disc, it may not be possible
to record at four times the normal speed or perform high-speed
recording. Record the CD at normal speed.
• The sound is muted during high-speed recording.
AKX50_GN_EN.indd 13 AKX50_GN_EN.indd 13
Recording from CD using analogue format
You can change your recording mode from the default digital
recording to analogue recording.
1
Press [4/9, CD] and then [8] (stop).
2
Press and hold [EDIT MODE] to select "ANALOG-REC".
Each time you press and hold the button:
ANALOG-REC
(analogue recording)
Note:
• The recording mode returns to the default "DIGITAL-REC" after
completing the analogue recording.
• High-speed recording is not applicable while using analogue
mode.
Recording mode
You can select the desired recording mode before you start the basic
recording (Z page 11).
Press [REC MODE] repeatedly to select your desired setting.
128 KBPS
" has
128 KBPS Long play mode
192 KBPS Normal mode
320 KBPS High quality sound mode
During recording
Press [DISPLAY] repeatedly to display the current recording
mode.
Note:
You cannot change the recording mode during recording.
Adding track marks
When recording from analogue source such as radio, music port or
AUX, you may want to separate the sound or music track at desired
point during recording.
You can perform this separation by adding track marks using the
various listed modes.
Before recording
Press [EDIT MODE] repeatedly to select your desired track
mark mode.
Radio:
MANUAL
MUSIC PORT or AUX:
MANUAL ]
MANUAL Track marks are inserted manually.
Press [OK] to add track mark during
recording.
TIME MARK Track marks are inserted automatically every fi ve
minutes.
SYNCHRO Recording starts automatically when the other
equipment starts to play.
Recording pause when it detects silence for
approximately three seconds.
Note:
• If you press [OK] or pause recording while using TIME MARK
mode during recording, the fi ve-minute counter will be reset.
• You cannot insert track marks manually in SYNCHRO mode.
DIGITAL-REC
{
(digital recording)
192 KBPS 320 KBPS
TIME MARK
SYNCHRO ] TIME MARK
2/25/2010 10:21:37 AM 2/25/2010 10:21:37 AM
13