Table of Contents
Advertisement
the Dome Camera will tilt 90° as the default setting.
•
M.E. Mode
M.E. is a standard mechanical operation. As the Dome Camera tilts to the maximum angle, it will pan
180°, and then continue tilting to keep tracking objects.
•
Image Mode
IMAGE represents digital IMAGE FLIP, which enables users to keep tracking objects seamlessly; under
the mode, almost no delay occurs in comparing with that under the M.E. mode.
NOTE: The Privacy Mask function will be automatically disabled if the Image Flip function is
enabled.
Digital Zoom
The network Speed Dome Camera can supports up to 12× Digital Zoom. Press the button "Set" to save
the setting.
ICR Function
With the IR cut filter, the camera can still catch clear image at night time or in low light conditions.
•
Auto
In the Auto mode, the internal circuit will automatically decide the occasion to remove the IR cut filter
according to the image brightness level.
•
On
Select the item to remove the IR cut filter.
•
Off
Select the item to disable IR function.
4.5.11 Camera - Miscellaneous Setups Menu 2
In the Camera - Misc (Miscellaneous) Setups Menu 2, users can setup various functions such Image
Inverse, Auto Calibration, Wide Dynamic Range (WDR; optional), Image Stabilizer (optional) and
2D/3D Noise Reduction (2DNR/3DNR; optional).
- 69 -
Advertisement
Table of Contents
