Mail; Ftp - Planet Networking & Communication ICA-H652 User Manual

Select one DDNS host from the provider list.
Host name
Enter the registered domain name in the field.
Username/E-mail
Enter the username or e-mail required by the DDNS provider for authentication.
Password/Key
Enter the password or key required by the DDNS provider for authentication.

4.3.5 Mail

The Administrator can send an e-mail via Simple Mail Transfer Protocol (SMTP) when motion is
detected. SMTP is a protocol for sending e-mail messages between servers. SMTP is a relatively
simple, text-based protocol, where one or more recipients of a message are specified and the message
text is transferred. The configuration page is shown as follows:
Two sets of SMTP can be configured. Each set includes SMTP Server, Account Name, Password and
E-mail Address settings. For SMTP server, contact your network service provider for more specific
information.

4.3.6 FTP

The Administrator can set as sending alarm message to a specific File Transfer Protocol (FTP) site
when motion is detected. Users can assign alarm message to up to two FTP sites. The FTP setting
page is shown below. Enter the FTP details, which include server, server port, user name, password
and remote folder, in the fields. Press "Save" when finished.
- 38 -