Charging The Battery - Maxcom mm822 User Manual

copies, if you use SD cards! Misuse of the card or other
factors might cause damage or loss of data stored on the
cards.

Insert the battery with the contacts +/- face into
the phone,

After installing the battery put the battery cover
back and slightly press the battery against the
back of the phone until it clicks into place.
2.2

Charging the Battery

Note: Use only the original Maxcom battery included in the
package. Using other batteries could damage your phone;
the manufacturer's warranty does not cover damage of
your phone caused by the use of any unauthorized
accessories. Never plug in the charger with the back cover
open.
In order to charge your phone.
1. Plug the charger into a power outlet.
2. Plug the end of the charger into a jack at the left side
of your phone. A message about connecting the
charger will appear on the display, and the bars in the
battery icon will repeatedly fill to show that the battery
is charging.
3. When the battery is fully charged, unplug the
charger from the power outlet and disconnect it
from your phone. The message Fully Charged will
12