Network Setting - Denver GSP-100 User Manual

You can adjust the brightness of the screen according your
demands. Press navigation key up, you can get high contrast
while down for low contrast.
Language: Select language for phone.
Date&Time setting: you can set the time and date with this
function, including setting date format.

Network setting

Call waiting: At this interface, you can carry out operation such
as Search, Activate and cancel. Once call waiting is chosen, if
there is new call during talking, network service center will
send busing signal through the phone. You can decide to
answer the call or not according to your situation. If this
function is closed, there will be no busy signal to prompt new
incoming call, while the caller will hear busy signal.
Call transfer: if call divert is started, the incoming call will be
diverted automatically to designated numbers. There're
various status of call divert. You can carry out the operation of
Search, Activate and cancel with this function.
Search: To check whether the function of call divert is on or
off.
Activate: to start up corresponding calls divert. Once start-up is
chosen, you can input the phone numbers that you
want to divert to and save it to start up this function.
Cancel: to close relative calls divert
A．Divert all calls: to divert all incoming calls to designated
number.
B．Divert when busy: to divert incoming call to designated
number if phone is busy.
C．Divert when no reply: to divert incoming call to designated
number if you do not answer.
D ． Divert when out of service: to divert incoming call to
designated number when the phone is switched off or you
are out of network coverage.
E．Cancel all: You could select this function to cancel all call
diverting when you don't need.
Call restrict: this function includes restricted outgoing calls (all
calls, international calls, call barring call out intern except) and
restricted incoming calls (all calls, restricted incoming calls
when roaming). If you want to cancel, the code is needed.
When these functions are running, there should be relative
service provided by network server.
22