Cisco DPC3828 User Manual page 35

Plug in and power on your PC and other home network devices. The LINK LED
6
on the residential gateway corresponding to the connected devices should be on
or blinking.
Once your residential gateway is online, most Internet devices will have
7
immediate Internet access.
Note: If your PC does not have Internet access, refer to How Can I Make Sure
TCP/IP Is Configured Correctly on my PC? (see "How Do I Configure TCP/IP
Protocol?" on page 24) for information on how to configure your PC for TCP/IP.
For Internet devices other than PCs, refer to the DHCP or IP Address
configuration section of the User Guide or Operations Manual for those devices.
OL-29 159 -01
Install the Wireless Residential Gateway
15