Memory; Memory Card Reader; Modem (Dial-Up) - Xitrix DeskFrame MX-910 User Manual

Chapter 6: Troubleshooting

Memory

You see a "Memory error" message
Use a third-party diagnostic program to help determine if a memory module is
failing.
You see a "Not enough memory" error message
Close all programs, then restart your computer.

Memory card reader

Drive letters for the memory card slots do not appear in the My Computer window
Reboot your computer.

Modem (dial-up)

See also "Internet" on page
Your modem does not dial or does not connect
Make sure that the modem cable is plugged into the modem jack and not the
Ethernet network jack. See
connections have been made correctly.
Make sure that your computer is connected to the telephone line and the telephone
line has a dial tone.
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
Remove any line splitters or surge protectors from your telephone line, then check
for a dial tone by plugging a working telephone into the telephone wall jack.
If you have additional telephone services such as call waiting, call messaging, or
voice mail, make sure that all messages are cleared and call waiting is disabled
before using the modem. Contact your telephone service to get the correct code to
temporarily disable the service. Also make sure that the modem dialing properties
are set correctly.
62.
"Desktop PC Back" on page 10
- 64 -
to make sure that the