Xitrix DeskFrame MX-910 User Manual page 59

9. Make sure that the positive (+) side of the new battery is facing up, then press the
battery into the socket until it snaps into place.
10. Replace the side panel by following the instructions in
page 48.
11. Reconnect all external cables and the power cord.
12. Turn on your computer.
13. Open the BIOS Setup utility.
14. In the BIOS Setup utility, restore any settings that you wrote down in
15. Save all your settings and exit the BIOS Setup utility.
- 53 -
Replacing the system battery
"Replacing the side panel" on
Step 3.