Monitor Out To Avr Screen - Mitsubishi Electric WS-48515 Owner's Manual

Edit NetCommand
Name Screen
Figure 10
The Name screen allows you to change the default
name for the A/V Receiver to a custom name of up to
eight characters (including a blank space), selecting
from letters, numbers, and nine different characters.
Using the TV's remote, press ADJUST
each letter, then press ENTER to move to the next
position. Press CANCEL to delete the current letter
and move back one character position. When in the
first position, the CANCEL button will return the name
to the default name.
Figure 10. Name screen
® , Adding an A/V Receiver, continued
or to select

Monitor Out to AVR Screen

Figure 11
Use this screen to select the input on the A/V Receiver
that is connected to Monitor Output, Audio 2 on the
television.
Note: Monitor Output, Audio Video 1 is for analog
recordings with a VCR.
Figure 11. Monitor Out to AVR screen
Finish Screen
Figure 12
To finalize your selections and complete the A/V
Receiver setup, select Finish from the Finish screen.
Note: If you connected individual devices audio
output directly to the A/V Receiver, you must
use the "Change" function of Edit NetCommand
and select the individual device to assign the
correct A/V Receiver input to be used with each
device.
Figure 12. Finish screen
37