Start, Gear Shifting And Stop Tractor - Yanmar EF393T Operator's Manual

Stop engine
(1) Pull accelerator lever (A) rearward (S) to decrease
engine speeds.
(2) Turn key switch to "OFF" position.
(3) See main shift lever, range shift lever, reverser
lever and PTO shift lever are in neutral positions.
IMPORTANT
Sudden stop of heated engine may cause engine
overheating. Prior to stop engine, keep engine
running at 1200 - 1500 rpm for about 2 minutes to cool
down.

4-2. Start, gear shifting and stop tractor

Start tractor
(1) Be sure right and left brake pedals are connected
by connector.
(2) Set engine speed about 1500 rpm.
(3) Move position control lever backward and raise rear
hitched implement.
(A) Position control lever
(C) Raise rear hitch implement
(4) Depress clutch pedal fully and shift main shift lever
and range shift lever to desired speed.
(A) Main shift lever
(B) Range shift lever
(5) Shift reverser lever to forward or reverse.
(6) Release clutch pedal gradually and tractor starts.
IMPORTANT
1) Never rest your foot on clutch pedal while operating.
It will cause premature wearing of clutch disc.
2) Be sure to apply the parking brake when you leave
the tractor.
3) Look around the tractor before starting.
(A) Accelerator lever (S) Slow speed
(A) Brake pedals
(A) Reverser lever (N) Neutral
(F) Forward
35
(B) Connector
(R) Reverse
EF393T OM