Break-In (Initial 50 Hours); Before Starting - Yanmar EF393T Operator's Manual

Diesel
Table of Contents

Advertisement

2. Break-in (initial 50 hours)

The new tractor should be carefully operated for the first 50
hours. It will surely have an effect on the lifetime and
performance of the tractor throughout the life. Pay attention
to the following points in particular:
(1) Avoid quick start or abrupt brake if it is not in
emergency case.
(2) Do not operate in higher speed or heavier load more
than necessary. Do not operate with full load.
Avoid from operation such engine speed comes down
by a load or smoke while working.
(3) Start operation after the engine is sufficiently warmed
up.
(4) Slow down on the rough road or slope.
(5) Check tire fixing bolts at the first 10 hours and 50
hours operation. If loosened, tighten it.
See "12. Wheel tread" for bolt tightening torque.
(6) Check the tractor at the time of first 50 hours
operation.

3. Before starting

WARNING
1) Before starting the engine, sit on the operator's seat and
make sure shift levers (reverser, PTO shift, range shift,
main shift) are at neutral position, and position control
lever is at down position. Negligence may cause tractor
sudden start and serious injury.
2) Do not run engine in a closed room. Run the engine in
well-ventilated area. If you are forced to start the engine
in a confined room, make sure the ventilation is proper.
Exhaust gas is poisonous and it can lead to death.
CAUTION
1) Before and after operation, never fail to check and service
the tractor. Particular check will be required at brake
pedals, controls, steering devices and tire rim fitting bolts.
Negligence can cause a heavy injury or accident to the
tractor and the human.
2) Set the parking brake during the warm-up operation.
Otherwise the tractor may abruptly start to run.
33
EF393T OM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents