Correcting Malfunctions - Dirt Devil Centrixx CPR Operating Manual

Cylinder vacuum cleaner
Table of Contents

Advertisement

Available languages

Available languages

5 Correcting malfunctions

Replacing the hygienic blow-out filter
5
Correcting malfunctions
Before sending the appliance to Royal
check whether you can correct the malfunctions yourself.
WARNING:
Before starting to troubleshoot, switch the appliance off and pull out the mains plug. Never use a
defective appliance.
Malfunction
Possible cause
Appliance does
Plug is not plugged in or the
not work
appliance is not switched on.
Socket does not carry any
current.
Power cable is damaged.
Appliance does
Dust container is full or blocked. Empty/clean dust container.
not suck up any
Filter is dirty.
dirt
Nozzle, telescopic tube or suction
hose are blocked.
Appliance makes
Sucked in particles are blocking
a strange noise
the air-way.
®
Appliance Customer Services, use the following table to
Solution
Plug in plug and switch on appliance,
Chapter 3.1, "Vacuuming".
Test the cylinder vacuum cleaner at another
socket which you are sure carries current.
Have the cable replaced by Royal
Appliance Customer Services, address,
Page 31, "Warranty".
Clean the corresponding filter,
"Filters".
Remove the blockage. If necessary, use a
long wooden rod for this (e.g. a broom
handle).
Remove the particles. If necessary, use a
long wooden rod for this (e.g. a broom
handle).
®
Chapter 4,
29

Advertisement

Chapters

Table of Contents
loading

Table of Contents