Using Other Nozzles (Accessories) - Dirt Devil Centrixx CPR Operating Manual

2 Unpacking and connecting

Using other nozzles (accessories)

1
a
2.3 Using other nozzles
(accessories)
2
1
1
a
b
4. Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 4/1) forwards
(Fig. 4/a). Then pull the telescopic tube by the handle
b
(Fig. 1/1) to the desired length (Fig. 4/b). To lock it,
release the telescopic tube lock when you let go. You
will hear an audible click.
Your cylinder vacuum cleaner is now ready to use.
Fig.4
Together with the floor nozzle just installed, you can
expand the range of functions of your cyclinder vacuum
cleaner with other nozzles.
The upholstery nozzle and the 2-in-1 combi-nozzle are
included as accessories in the scope of delivery. They can
3
be stored in the accessory mounts (Fig. 5/1) underneath
the housing cover.
WARNING:
Before you open the housing cover, switch off the
appliance and observe the instructions under
3.2, "Switching off and retracting the power cable".
Fig.5
- Upholstery nozzle (Fig. 5/2)
Use this to clean soft, scratch-resistant surfaces (e. g.
upholstered furniture).
- 2-in-1 combi-nozzle (Fig. 5/3) to be used as:
1
Crevice nozzle (Fig. 6/a)
Use this to vacuum dust from hard to reach places.
Furniture brush (Fig. 6/b)
By simply turning the brush attachment (Fig. 6/1) you
can turn the 2-in-1 combi-nozzle (Fig. 6/a) into a
furniture brush (Fig. 6/b). Use this to vacuum dust off
objects that have sensitive surfaces (e.g. cupboards,
Fig.6
doors).
Also available as an option are the following:
- Turbo brush (Fig. 7)
This has a rotating brush head and is therefore most
suitable for deep-cleaning carpets. Brushing also
causes the carpet pile to straighten up.
NOTE:
When using the turbo brush, a loud noise can occur as a
result of the high speed of the brush. This is normal.
Fig.7
Chapter
23