Using Other Nozzles (Accessories) - Dirt Devil Centrino XL Operating Manual

2 Unpacking and connecting
2.3 Using other nozzles
(accessories)
3
2
Fig.5
Fig.6
Fig.7
1
Fig.8
Fig.9
Together with the floor nozzle just assembled, you can ex-
pand the range of functions with other nozzles.
„
Crevice nozzle, furniture brush and upholstery nozzle
are included as accessories in the scope of delivery.
They can be secured to the accessories mount (Fig. 4).
- Crevice nozzle (Fig. 5/1)
Use this to vacuum dust from hard to reach places.
1
- Furniture brush (Fig. 5/2)
Use these to vacuum dust of objects with sensitive
surfaces, while simultaneously brushing them.
- Upholstery nozzle (Fig. 5/3)
Use this to clean soft, scratch-resistant surfaces (e.g.
upholstered furniture).
„
Also available as an option are the following:
- Turbo brush (Fig. 6)
This has a rotating brush head and is therefore most
suitable for deep-cleaning carpets. Brushing also
causes the carpet pile to straighten up.
NOTE:
When using the turbo brush, a loud noise can occur as a
result of the high speed of the brush. This is normal.
- Parquet brush (Fig. 7)
This is equipped with long bristles and is used for vac-
uuming particularly sensitive surfaces (e.g. parquet,
laminate flooring).
WARNING:
Only assemble the nozzles if the plug has been removed
from the socket. The vacuum cleaner could be switched
on by accident.
Proceed as follows to attach the nozzles:
1. Switch the appliance off and pull the plug out of the
socket.
2. Remove the existing nozzle from the telescopic tube.
3. Push the desired nozzle on the lower end of the tele-
scopic tube (Fig. 8) or if necessary directly onto the han-
dle (Fig. 9).
ATTENTION:
If you use the cylinder vacuum cleaner without attached
nozzles, there is a greater risk of accidently vacuuming
up objects.
4. Secure the nozzles no longer required in the accesso-
ries mount, as far as this is possible (Fig. 4). Keep the
other nozzles safe and inaccessible to children.
23