Advertisement
r2.0-7/8/14
Figure 12,13 - Temperature Sensor installation Securing Sensor Tree to Rack with Sufficient Slack for Door Operation
8. For installation of Quad Fan C units a control signal of 0-10VDC should be provided via an alternate means
than the provided equipment. This should be wired directly to the provided Phoenix type connector to the
indicated connections.
7510 Montevideo Road
Jessup, MD 20794
Tel (410)799-4200
Installation Guide: PowerAire® Quad
Quad- S: 16943, 17351 Quad- M: 16886, 16633 Quad- C: 17347, 17348
Figure 11 - Routing temperature sensor tree through cable entry point
PowerAire Quad- S or M units should skip step 8
© 2012 Tate Access Floors, Inc.
8 of 15
Advertisement
