System Information - a-them mrx 1120/720 Operating Manual

3.10 SYSTEM INFORMATION

System Information
Update Via USB
Release Version
Micro Version
DSP Version
OSD Version
ARC Name
ARC Upload Time
UPDATE VIA USB AND VERSION NUMBERING:
The operational characteristics of the AVM/MRX are controlled by software installed
through the USB port on the front panel. Updates can be downloaded from our web site
and installed afterwards.
• On www.anthemAV.com locate the software pertaining to your MRX model and
voltage. Proceed only if your version is a lower number, indicating that it is older.
• You will be asked where to save a .zip file – save it to Desktop.
• When the .zip file download is complete, extract it to Desktop.
• See Read Me.txt for the change history.
• Copy the .fw file to your USB flash drive, root directory (not in a folder). Make sure
that no other .fw file is in the root directory.
• Connect the USB flash drive to the back of the AVM/MRX, directly or through the
supplied USB extension cable.
• Select Update Via USB. Alternatively, the front panel Select button can be pressed
for 8 seconds to start the process without going into the setup menu (MRX must be
powered on first). Installation takes less than 10 minutes and the front panel display
will indicate progress. Do not interfere by pressing buttons or turning power off – the
unit will turn on and off by itself a few times. At the end it will remain on with the
normal source and volume info on the display.
ARC NAME
This is the name that you gave to your measurement file.
ARC UPLOAD TIME
This is the date and time that your ARC file was uploaded.
1.0.0
1.0.0
1.0.0
1.0.0
34