Setup - a-them mrx 1120/720 Operating Manual

S E T U P
For optimum performance and enjoyment, your AVM/MRX should be properly set up.
This may appear like a lot of work but most settings do not need to be changed from
defaults. The important ones relate to your display and input connections, and distance
from listening area to each speaker. Anthem Room Correction will set crossovers and
channel levels. The rest is preference and the listening mode presets, for example,
should be set after you have played various sources and determined which surround
modes you like most.
Front Panel Remote
HOW TO NAVIGATE IN THE SETUP MENU
• Press Setup to enter or exit
• Use the up/down/left/right buttons to move through menus and selections
• Press PG/PR up/down to skip page
• Press Select to make a selection or to start/finish editing the item
• Pressing Last while editing returns the item to its previous setting
• Press Clear to set the item to its default value
The menu below appears on your display once pressing Setup. On-screen, up to nine
menu items are displayed at once although for clarity this manual shows all items in
each menu together.
Main Menu
Speaker Setup
Bass Management
Listener Position
Level Calibration
Input Setup
Preferences / Line Output
Network / Remote Control
General Configuration
Save / Load Settings
System Information
INPUT

SETUP

SELECT
PG/PR
16