Input Setup - a-them mrx 1120/720 Operating Manual

3.5 INPUT SETUP

Inputs and listening mode presets are configured in this section. From the factory, 5
inputs are set but you may change this to anything from 1 to 30 configurations.
Input Setup
HDMI 1
HDMI 2
HDMI 3
FM
Play-Fi
Add Input
Zone 2 Input Follows Main
To add an input at the end of the list, highlight Add Input and press Select.
To insert an input, highlight one on the list and press Input. The new input will be
inserted after the highlighted one.
To delete an input, highlight it and press Clear on the remote control.
ZONE 2 INPUT FOLLOWS MAIN
When changed to Yes, any input can go to Zone 2 without separate cabling from the
source, but the Zone 2 will always play whichever input is selected in the main zone.
Multichannel sources get downmixed to 2-channel so all sounds can go to Zone 2.
These settings are displayed for each configuration:
HDMI 1 Input Setup
Input Name
Video Input
Audio Input
Zone 2 Input
Process Analog Audio Input
Speaker Profile
Anthem Room Correction
Dolby Volume
Dolby Volume Leveler
Mode Preset for Stereo Sources
Mode Preset for Multi-Ch Sources
Lip Sync
23
No
HDMI 1
HDMI 1
HDMI
Analog 1
N/A
Config 1
N/A
Off
N/A
Last Used
Last Used
0 ms