Preferences / Line Output - a-them mrx 1120/720 Operating Manual

3.6 PREFERENCES / LINE OUTPUT

Here you can set preferences as listed.
Volumes / REC Output
Front Panel Brightness
Front Panel Wake-up
On-Screen Info Display
Mute Level
Main Max Volume
Zone 2 Max Volume
Main Power On Volume
Zone 2 Power On Volume
Main Power On Input
Zone 2 Power On Input
Headphone Mutes Main Pre-Out
Mute Line Out when selecting
Mute Digital Out when selecting
FRONT PANEL BRIGHTNESS
Set preferred default brightness.
FRONT PANEL WAKE-UP
When a button is pressed the display can go to a brighter level for 5 seconds – select
None, Up 1 brightness level, Medium, or High. When "None" is selected and the display
is off, the wake-up behaves as Up 1 to indicate that the unit is running.
ON-SCREEN INFO DISPLAY
When changing volume, input, listening mode, etc, the info that is shown on the front
panel is also shown on-screen for 5 seconds. To disable the on-screen info, turn this
setting Off.
MUTE LEVEL
When Mute is pressed, sound can cut out completely or decrease in volume by the
amount that you set to keep some of it in the background. Select from Silent or -5 to
-30 dB in 5 dB steps.
MAXIMUM VOLUME
These settings allow you to limit the volume setting to avoid damaging equipment
and/or hearing.
POWER-ON VOLUME
The volume will be at these levels when the AVM/MRX is turned on. To power-on at the
last used volume, set the volume preset below -90 to make Last Used appear.
POWER-ON INPUT
The input will be the pre-set one or Last Used when the AVM/MRX is turned on.
Medium
Up 1
On
Silent
0 dB
0 dB
-35 dB
-35 dB
Last Used
Last Used
Yes
None
None
26