Trademark And License Information - Mitsubishi WD-62530 Owner's Manual

Appendix D: Troubleshooting, continued
Indicators
Symptom
1. Lamp indicator light is a constant red.
2. Lamp indicator light is a flashing yellow.
3. Status indicator light is a steady yellow.
4. Status indicator light is a steady/flashing
red.
Sound
Symptom
1. There is no sound even when the
volume is turned up.
2. The sound does not match the screen
picture.
Remarks
Turn the TV off for at least 2 minutes. Turn it back on. If light is
still red, the lamp has failed. Replace the lamp cartridge. See
Appendix C for information about replacing the lamp cartridge.
If you have questions call Mitsubishi Consumer Relations at
800-322-2119.
Lamp cover door is open or lamp cartridge is not secure. See
Appendix C for information about replacing the lamp cartridge.
Room temperature has exceeded proper levels. Cool the room.
Service is required. Contact your dealer or a Mitsubishi Autho-
rized Service Center to arrange for a service evaluation. Listings
of Mitsubishi Authorized Service locations can be obtained from
our web site, www.mitsubishi-tv.com or by calling 1-800-332-2119.
Remarks
Check to see if the MUTE button is on.
•
• The TV's "Listen to:" setting may be set to SAP.
• Check that the TV Speakers setting is On in the Audio/Video
menu.
• Perform System Reset.
• The TV's Listen to: setting may be set to SAP.
• If using stereo or A/V receiver speakers, check their input selec-
tion.
• If using stereo or A/V receiver, check that AUDIO OUTPUT L/R on
TV's back panel is connected to the A/V receiver.
Appendices Appendices
81 81