Appendix C: Replacing The Lamp Cartridge - Mitsubishi WD-62530 Owner's Manual

Appendix C: Replacing the Lamp Cartridge

CAUTION: If the television is on, press POWER to turn it off. Unplug the television and allow
it to cool for at least one hour before attempting to replace the lamp cartridge.
Lamp Life
The light source for this television is a lamp, which is part of a lamp cartridge assembly. The life of the lamp can vary,
based on the lamp itself, the air temperature around the TV while it is operating, and your viewing patterns. Warmer air
or poor ventilation shorten the lamp life, as does turning the television on and off frequently. Mitsubishi warrants the
lamp for one (1) year from the date of original purchase at retail. It is likely that the lamp will last much longer than this.
Order a new lamp cartridge when the TV picture becomes noticeably dimmer. It is best to have a replacement
lamp cartridge on hand before the existing lamp fails.
To Order A New Lamp Cartridge
While Under Warranty
Call (800) 553-7278. Please have model number,
serial number, and TV purchase date available.
IMPORTANT: All lamps replaced under warranty
must be returned to Mitsubishi where they will be
inspected for defect verification.
• Do not remove the lamp cartridge immediately after turning off the television. You may get burned because the
lamp is very hot. Allow the television to cool for at least one hour before replacing the lamp cartridge.
• Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.
• Do not touch the lamp glass element. It may be very hot and break, causing injuries or burns.
• Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electri-
cal shock. If a foreign object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for
service.
• Install the lamp cartridge securely. Failure to do so may cause a fire.
• Do not touch the lamp glass elements. Oils from your fingers may cause premature lamp failure.
THE LAMP INSIDE THIS PRODUCT CONTAINS MERCURY AND MUST BE RECYCLED OR
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For disposal or recy-
Hg = MERCURY
cling information, please contact your local authorities or the Electronic Industries Alliance at
www.eiae.org
CAUTION
BURN DANGER!
During normal operation, the surfaces inside
the TV near the lamp are extremely hot.
TOUCH THE LAMP CARTRIDGE BY THE HANDLE ONLY
Do not touch the glass parts of the lamp cartridge.
WARNING
After Warranty
Visit our website at: www. mitsuparts.com
or
Call (800) 553-7278 and order lamp cartridge part
number 915P043010.
Appendices Appendices
75 75