Hdtv Cable Box Or Satellite Receiver With Component Video; Standard Cable Box, Satellite Receiver, Or Other Device With S-Video; Standard Cable Box, Satellite Receiver, Or Other; Device With S-Video - Mitsubishi WD-62530 Owner's Manual

Mitsubishi digital electronics owner's guide lcd high-definition television wd-62530, wd-52531, wd-62531

Hide thumbs

Table Of Contents

Table of Contents

Chapter 2. TV Connections

HDTV Cable Box or Satellite

Receiver with Component Video

If your cable box or satellite receiver has HDMI or DVI

outputs, use the connections for HDMI or DVI video

devices described later in this chapter.

Required: RCA component video cables, left/right analog

audio cables.

A coaxial splitter, available at most electronic supply

stores, may be required to complete this installation

1. Connect the cable from the outside cable or satel-

lite service to CABLE IN or SATELLITE IN on

the cable box or satellite receiver. See your device's

owner's guide for instructions and cable compatibility.

��

Figure 3. Connecting an external HDTV receiver with

component video connections

2. Connect RCA-type cables from the Y Pb Pr outputs

on the cable box or satellite receiver to COMPO-

NENT INPUT on the TV back panel, matching the

colored connections.

3. Connect left (white) and right (red) audio cables from

the cable box or satellite receiver to COMPONENT

INPUT AUDIO L and AUDIO R on the TV back

panel.

4. Optional: To allow use of the Split Screen feature

with channels from ANT 1 and the cable box,

connect the incoming terrestrial antenna or cable

service (not satellite) to ANT 1/MAIN on the TV

��

� ��

��

�

��

�

��

� �

�

��

�

��

�

��

� �

�

��

�

��

back panel. A coaxial splitter, available at most elec-

tronics supply stores, may be required to complete

this installation.

Note: To receive the beneﬁts of digital surround sound,

connect the digital audio output from your HDTV

cable box or satellite receiver directly to your digi-

tal A/V receiver

If your cable box or satellite receiver has HDMI

or DVI outputs, please see "HDMI Device" and

"DVI Device" connections later in this chapter.

Standard Cable Box, Satellite

Receiver, or Other Device with

S-Video

Required: S-Video cable and left/right analog stereo

audio cables.

Connect the cable from the outside cable or satellite

service to CABLE IN or SATELLITE IN on the

cable box or satellite receiver.

2. Connect an S-Video cable from VIDEO OUT on the

cable box or satellite receiver back panel to INPUT

S-VIDEO on the TV back panel.

3. Connect left (white) and right (red) audio cables from

AUDIO OUT on the cable box or satellite receiver to

INPUT/AUDIO L and AUDIO R on the TV back

panel.

Note: Refer to the cable box or satellite receiver Owner's

Guide for cable or dish antenna connections to the

receiver.

��

� �

��

Figure 4. Connecting a device with S-Video

��

� ��

��

�

��

�

��

� �

�

��

�

��

�

��

� �

�

��

�

��

� �

��

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

This manual is also suitable for:

Wd-52531 Wd-62531

Hdtv Cable Box Or Satellite Receiver With Component Video; Standard Cable Box, Satellite Receiver, Or Other Device With S-Video; Standard Cable Box, Satellite Receiver, Or Other; Device With S-Video - Mitsubishi WD-62530 Owner's Manual

Hide quick links:

Related Manuals for Mitsubishi WD-62530

Related Content for Mitsubishi WD-62530

This manual is also suitable for:

Table of Contents