Tv Back Panel - Mitsubishi WD-62530 Owner's Manual

TV Back Panel

1
��� � �
���
����� �
��� � �
����
����� �
1. ANT 1/MAIN & ANT 2/AUX (Antenna)
If you are connecting an antenna or direct cable without a
cable box, connect the main antenna or cable source to
ANT 1/MAIN. You can also connect another antenna or
cable source to ANT 2/AUX.
ANT 1/MAIN and ANT 2/AUX can each receive both
digital and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.
2. INPUT 1 & 2
(Audio and Video)
INPUT 1 and INPUT 2 can be used to connect a VCR,
Super VHS (S-VHS) VCR, DVD player, standard satellite
receiver, or other A/V device to the TV. Please note that
if S-VIDEO and (Composite) VIDEO are both available,
you must choose to connect only one.
Note: Because S-Video provides a better video signal
than Composite Video, use S-Video if available on the
source A/V device.
3. COMPONENT INPUT 1 & 2
(Audio and Video)
Y Pb Pr (Support 480i/480p/720p/1080i video formats)
Use these jacks to connect devices with component video
outputs, such as DVD players, external HDTV receivers, or
2 8
������ ������
�� ����� ����� � ������ � �����
������� �����
������� ����
������
7
Chapter 1. Television Overview
3
��������� ����� �
�����
��������� ����� �
� �������
� �� �� ����� � ���� � ���� � ����� �
� � � �� ��
compatible video game systems. Please see Appendix B
for signal compatibility.
4. HDMI™ 1 & 2 (Inputs)
(Both Audio and Video in each HDMI jack)
(Support 480i/480p/720p/1080i video formats)
HDMI (High Definition Multimedia Interface) supports
uncompressed standard and high-definition digital video
formats and PCM digital audio format. The WD-62530
model has only one HDMI jack.
Do not connect a computer to either of the HDMI jacks .
Use these inputs to connect to EIA/CEA-861 compliant
devices such as a high-definition receiver or DVD player.
These inputs can also accept DVI inputs. To connect a
DVI device, use an HDMI-to-DVI cable adapter plus analog
audio cables. Connect the analog audio cables to the
DVI ANALOG AUDIO inputs (#5) on the TV to receive
left and right stereo audio from your DVI device. The WD-
62530 model has only one pair of DVI Analog Audio input
jacks.
These inputs are HDCP (High-Bandwidth Digital Copy
Protection) compliant.
These inputs are
ability with other products certified by Simplay™.
5
� ������ � ����� � � � ������ � ����� � �
����� � ���� � ���� � ���� � �����
����� � ���
���� � ���� �
4
certified for proper interoper-
17
���
������
�����
����� �
���
������
�����
����� �
�����
������
6