Safety Section; Components (Front Side View) - handi quilter Avante QM30235 User Manual

Safety Section

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Please note: Do not operate your HQ
quilting machine until you have completely read the
information contained in this manual. Please keep
all packaging and order information for warranty
purposes.
1. The HQ Avanté is very heavy. Never attempt to
18
lift it alone – always use two people when lifting.
2. Always unplug the HQ
outlet when performing any maintenance,
changing the needle, removing thread locks, or
when left unattended.
3. Keep fingers away from all moving parts. Use
caution around the needle or sharp external
components.
4. Change the needle often. Do not use bent or dull
needles. "Every quilt deserves a new needle".
5. Switch the power off when making any
adjustments in the needle or bobbin area, such as
threading the needle, installing the bobbin case, or
when oiling or cleaning.
6. Never drop or insert foreign objects into any
opening.
7. The HQ Avanté should only be used indoors
18
away from moisture.
8. The HQ Avanté should not be stored or used in
18
extreme temperatures.
9. Use the HQ Avanté only for its intended use as
18
described in this manual.
10. Use only attachments recommended by the
manufacturer.
11. To disconnect from the wall outlet, push the
switch to the off position, then remove the
plug from outlet pulling from the plug, not
the cord. Never operate the HQ
cord is damaged or not working correctly. If a
mechanical or electrical problem is encountered,
return the HQ Avanté to the nearest
18
authorized service center or the manufacturer
for examination, repair, electrical or mechanical
adjustment.
Page 4
Avanté
18 ®
Avanté from the electrical
18
Avanté if the
18
12. It is not recommended that the HQ
Quilting Machine be used with any machine
quilting frame other than those recommended by
Handi Quilter.
General Specifications
The HQ Avanté utilizes high-tech electronics and an
18
innovative touch-pad user interface to offer greater
functionality and ease of operation to home quilters
than ever before conceived in the quilting industry.
The HQ Avanté quilting machine is a high quality
18
machine that incorporates very robust design
features and is very easy to service.
Sewing Opening Dimensions:
Sewing Speed:
Stitches-Per-Inch:
Needle System:
Needle Sizes, (recommended):
Hook System:
Bobbin Type:
Bobbin Case:
Motor Type:
Needle Positioning:
Electrical Power:
LED Power Consumption:
Sew Foot Stroke/Lift:
Needle Bar Stroke:
Take-Up Stroke:
Lubrication, main components:
Lubrication of hook:
Disclaimer
Handi Quilter and its Representatives are in no
way legally responsible or liable for damage to the
HQ Avanté when used improperly or not in
18
accordance with the guidelines stated in this manual
or when used on Machine Quilting Frames not
recommended by Handi Quilter.
Avanté
18
(245 mm X 610 mm)
8.25" X 18"
Manual Mode:
Min 90spm, Max 1800spm
Regulated Mode:
Min 0spm, Max full speed
4spi – 18spi
134 (135 X 7)
12/80 - 20/125
Rotary, Vertical, M-class bobbin
Aluminum, Class M
Type MF
Brushless DC
Up and down, walking stitch
90 – 264 VAC, 47-63Hz, 300W peak
8 W
5 mm
35.3 mm
73 mm
Kluber Lube, permanent
Velocite 10, Texaco 22
HQ Avanté User Manual
18