Imagine Nexio AMP NX3801 HDI Gen6 Hardware Installation And User's Manual page 54

54
Chapter 7
How to Create or Rebuild a RAID 1 Boot Drive
6 Select Create Volume to begin the process.
Figure 7-2 Select
7 In the Create Volume window, verify that Intel(R) C600 Series chipset SATA RAID Controller is
selected.
8 Verify that Real-Time data protection
(RAID 1) under Select Volume Type is selected.
9 Click the Next button.
Figure 7-3 Configure
10 In the Name window, enter the name of the volume
11 In Select the array disks (minimum selection required):, select SATA SSD on Controller 0, Port 0
(224 GB) (System) and SATA SSD on Controller 0, Port 1 (224 GB).
12 In Do you want to keep data from one of the selected disks?, select Yes: SATA SSD on Controller 0,
Port 0.
175-100423-00