Selecting Monitored Diagnostics - Imagine Nexio AMP NX3801 HDI Gen6 Hardware Installation And User's Manual

Selecting Monitored Diagnostics

The NEXIO Monitor lets you select which diagnostics to monitor. When a fault occurs both the Status and
the NEXIO icon will change to one of the four fault icons seen in
Table 5-1. Monitored Diagnostics
Front Panel LEDs
1
Set by default
2
Clear diagnostic will not be monitored
NEXIO AMP Generation 6 Hardware Installation and User Guide
NEXIO Monitor System
Tray No
Errors
Table 5-1:
System Selectable Function
Tray Monitoring
Errors Parameters
1,2 Displays the current sta-
 Overheat
tus of the CPU Temper-
When checked,
ature.
monitors Temper-
ature of CPU.
1,2 Displays the current sta-
 Fan Failure
tus of the Fan.
When checked,
monitors for a Fan
failure.
A solid green circle indi-
cates the power supply
is operating correctly, a
change to a red circle
indicates power supply
fault, drive problem or
drift.
1,2 Displays the current sta-
 LLM Fault
tus of the LLM. Change
When checked,
in icon indicates a criti-
monitors LLM
cal problem due to drift
function.
or a drive problem.
2 Only info to appear in Current Fault win-
 FTP Server
dow.
When checked
monitors FTP
Server.
NXAMP3801HDX/HDI 45
Action
Refer to System
Cooling on
page 74.
Refer to
NXAMP3801HD
X/HDI Rear
Panel on
page 24.
Refer to the
NEXIO Low
Level Module
User Guide.
175-100423-00