5
On the Harris Recovery Desktop, double-click the Harris Utility Launcher icon.
Figure 6-3 Harris Recovery Desktop
6
In the Harris NEXIO Utility Launcher, click the IMAGING button to open the NxImage application.
7
From the File menu, select Capture WIM Image to open the Capture Image dialog.
Figure 6-4 Capture Image Dialog
8
Click the Browse button below Step (1): Select the source drive or field to capture.
9
Select the source drive or folder to capture.
10 Select the Folder.
11 Click the Browse button below Step (2) Select the name and location for the image file.
12 Select the location and enter name from the file and click Save.
13 In the Capture Image dialog, select the Make Bootable checkbox.
NEXIO AMP Generation 6 Hardware Instalation and User Guide
NXAMP3801HDX/HDI
49
175-100423-00