Front Panel Components
LED Indicators
The LED Indicators,
monitoring NXAMP3801HDX/HDI, see
Table 2-2 LED Front panel LED indicators
Front Panel LEDs
LCD and Keypad
The LCD and keypad
power off, and reset the system. You can also view status and monitor the system using the arrow keys. (For
more information, see
Figure 2-3 LCD and Keypad
Power On/Reset Button:
The power on/reset button enables you to turn on NXAMP3801HDX/HDI, and reset the system.
Table
2-2, are used to monitor status and health of the frame. For more information on
Selecting Monitored Diagnostics
LED
Description
Color
TEMP
Green
Displays the current status of the CPU temperature.
Red
Indicates temperature above critical threshold.
FAN
Green
Displays the current status of the fan.
Red
Indicates fan stopped rotating or falls below programmed RPM limit.
PS
Green
Indicates the power supply is operating correctly.
Red
Indicates power supply fault, drive problem or drift.
MEDIA
Green
Displays the current status of the LLM.
Red
Indicates a critical problem due to drift or a drive problem.
(Figure
2-3) work together to provide a user interface that enables you to power on,
LCD Keypad Buttons
Turn On — press and hold the button for 5 seconds to power on the system.
System Reset — when powered on; press and hold the button for 3 seconds to
reset the system.
NEXIO AMP Generation 6 Hardware Installation and User Guide
on page 46).
NXAMP3801HDX/HDI
on page 45.
175-100423-00
19