Real Time Clock - Toshiba Satellite P50W-B Series User Manual

Battery
If you suspect a problem with the battery, you should check the status of
the DC IN/Battery indicator.
Problem
Battery doesn't
power the computer
Battery doesn't
charge when the AC
adaptor is attached.
Battery doesn't
power the computer
as long as expected

Real Time Clock

Problem
The BIOS setting
and system date/
time are lost.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the
User's Manual
Procedure
The battery may be discharged - connect the AC
adaptor to recharge the battery.
If the battery is completely discharged, it will not
begin charging immediately, in these instances you
should wait a few minutes before trying again. If
the battery still does not charge, you should check
that the power outlet the AC adaptor is connected
to is supplying power - this can be tested by
plugging another appliance into it.
If you frequently recharge a partially charged
battery, the battery might not charge to its full
potential - in these instances you should fully
discharge the battery and then attempt to charge it
again.
Check the Power saver option under Select a
power plan in the Power Options.
Procedure
The lasting time of the Real Time Clock (RTC) has
run out - you will need to set the date and time in
the BIOS setup utility by using the following steps:
1. Launch the BIOS setup utility.
Please refer to
for further information.
2. Set the date in the System Date field.
3. Set the time in the System Time field.
4. Press F10 - a confirmation message will be
displayed.
5. Select Yes - the BIOS setup utility will end
and the computer will restart.
The Keyboard
TOSHIBA Setup Utility
section for further information.
section
6-6