Key Combinations - Panasonic Touchbook CF-50 Series Reference Manual

Key Combinations

CAUTION
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
NOTE
The key combinations below may not work while some applications are running in high priority.
After you log on to Windows, it will take some time until the key combinations will be operable.
The popup window may not be displayed depending on the state of the application you are using (e.g., when the
[Command Prompt] screen is set to "Full Screen").
Key Functions
1
*
LCD brightness con-
Fn + F1
trol ( down)
* 1
Fn + F2 LCD brightness con-
trol ( up)
2
*
Display change
Fn + F3
Speakers on/off switch
Fn + F4
Volume control
Fn + F5
( down)
Fn + F6
Volume control ( up)
Power off using the
Fn + F7
standby function
Remaining capacity of
Fn + F9
the battery pack
Power off using the hi-
Fn + F10
bernation function
* 1 Operable even before you log on to Windows, but popup windows will not be displayed.
2
* Operable even before you log on to Windows.
Pressing this key combination adjusts the bright-
ness of LCD. The brightness setting is stored in
memory separately under the condition the AC
adaptor is connected and under the condition the
AC adaptor is not connected.
By pressing this key combination, you can select
either an external display, LCD or simultaneous.
( page 32)
Pressing this key combination turns on/off audio
from the internal speakers and headphone jack.
CAUTION
Disabling the speakers will also disable the
warning beep.
Pressing this key combination adjusts the volume
of the internal speakers and headphone jack.
NOTE
This key combination cannot be used to adjust
the volume of the warning beep.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. (
Pressing this key combination displays the remain-
ing battery capacity on the screen. (
Pressing this key combination causes the current
screen on the display to be saved to the hard disk,
and powers off the computer. (
Popup Window
page 8)
page 19)
page 8)
3
OFF
ON
Remaining
capacity (%)
display
Battery pack is
not inserted.