Setup Instructions; Product Specifications; Motor Pre-Filtering Assembly - Intex Krystal Clear CS15110 Owner's Manual

Sand filter pump 14" (360mm) & saltwater system

Hide thumbs

Table Of Contents

Table of Contents

The sand filter removes suspended particles and sanitize your pool.

chemistry is a specialized area and you should consult your local pool

service specialist for details.

Power:

Amperage:

Wattage:

Ideal Salt Level:

Maximum Sanitizer Output/hour:

Copper Ionizer Output Current:

Maximum working pressure:

Effective filtering area:

Maximum Flow Rate:

Recommended filtering media:

(Not included)

Recommended filtering media quantity:

Limited Warranty:

TOOLS REQUIRED:

Pump location and mounting:

•

The system must be installed on a solid level and vibration-free base.

•

Provide a location protected from the weather, moisture, flooding and

freezing temperature.

•

Provide adequate access, space and lighting for routine maintenance.

•

Pump motor requires free circulation of air for cooling. Do not install

the pump in a damp or non-ventilated location.

A team of 2 or more people is recommended for setting up this product.

Motor pre-filtering assembly setup:

Remove the sand filter and its accessories

from the packaging carefully and inspect for

any visible damage. If parts are damaged

contact your local service center listed at the

back of this owner's manual.

In a counter-clockwise motion unscrew the leaf

trap cover (14) from the pre-filter housing. Take

out the basket

(see drawing 10).

Connect the pre-filter housing to the motor

water inlet. Note: Align the connector in the

pre-filter housing with the water inlet on the

motor (see drawing 11).

SAVE THESE INSTRUCTIONS

(163) MODEL CS15110 SAND FILTER PUMP & FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U

PRODUCT SPECIFICATIONS

110-120 Volt AC

Saltwater System -

3000 ppm (parts per million)

10 grams/hour

175mA

3.5 bar (50 psi)

0.1 m

6050 liters/hour (1600 gallons/hour)

Use only No. 20 silica sand. Particle size

range 0.45 to 0.85 mm (0.018 to 0.033

inches). Uniformity Coefficient less than 1.75.

25 Kg (55

2 Years (see "Limited Warranty")