AOpen MX3L User Manual page 75

AWARD BIOS
Integrated Peripherals
Integrated Peripherals
Integrated Peripherals
Integrated Peripherals
IDE Primary Master
PIO
Auto
Mode 1
Mode 2
Mode 3
Mode 4
Integrated Peripherals
Integrated Peripherals
Integrated Peripherals
Integrated Peripherals
IDE Primary Master
UDMA
Auto
Disabled
Integrated Peripherals
Integrated Peripherals
On-Chip Primary
PCI IDE
Enabled
Disabled
3-32
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
Setting this item to Auto activates the HDD speed
auto-detect function.
data transfer rate of HDD. For example: mode 0 data
transfer rate is 3.3MB/s, mode 1 is 5.2MB/s, mode 2
is 8.3MB/s, mode 3 is 11.1MB/s and mode 4 is
16.6MB/s. If your hard disk performance becomes
unstable, you may manually try the slower mode.
Caution: It is recommended that you connect
the first IDE device of each channel to the
endmost connector of the IDE cable. Refer to
section "Connectors" for details on how to
connect IDE device(s).
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
This item allows you to set the Ultra DMA/33 mode
supported by the hard disk drive connected to your
primary IDE connector.
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
This parameter lets you enable or disable the IDE
device connected to the primary IDE connector.
The PIO mode specifies the