Getting started
Installation options
4.
Lift and rotate the bracket and lock it into tabletop position as indicated
below.
5.
Plug one end of the telephone line cord into the TEL LINE jack on the back
of the telephone base. Plug the other end of the telephone line cord into a
telephone wall jack. Place the handset in the telephone base.
6.
Rotate the top of the display up or down to adjust the angle of the screen
for maximum visibility.
Wall-mount
position
Telephone wall jack
DSL filter (not included)
is required if you have DSL
high-speed Internet service.
Tabletop-mount
position
12