AquaCraft Motley crew Instruction Manual
  1. Manuals
  2. Brands
  3. AquaCraft Manuals
  4. Toy
  5. motley crew
  6. Instruction manual

AquaCraft Motley crew Instruction Manual

Hide thumbs Also See for Motley crew:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for AquaCraft Motley crew

Summary of Contents for AquaCraft Motley crew

  • Page 2: Items Included

    NOTES ABOUT USING LIPO BATTERIES IN YOUR BOAT: INTRODUCTION & DESCRIPTION CHANGES The Motley Crew uses the AquaCraft 60amp ESC. This ESC has a built in stutter bump system that cycles the power to the motor when the battery voltage reaches 12V. This is designed to warn Thank you for purchasing the AquaCraft Motley Crew.

  • Page 3: Warranty & Service

    Hand laid fi berglass hull and canopy AquaCraft, at their option, will repair or replace at no charge, the Drop tub design incorrectly made part. This warranty does not cover damage caused Roomy interior by crash, abuse, misuse, alteration or accident.

  • Page 4: Start-Up And Operation

    START UP AND OPERATION Install four AA batteries into the transmitter using the installation pattern molded into the bottom of the battery tray. Turn on the transmitter, making sure it’s working by viewing the LED on the front. The LED should glow bright red. Remove the canopy and install the provided hook and loop to your battery packs.

  • Page 5: Troubleshooting

    ➧ Allow the electronics to cool before running the boat again. TIPS AND NOTES: The handling and performance of your Motley Crew can be disrupted by the smallest obstructions in the water. If you happen to pick up a small duck feather or leaf, the power system could draw more current than the ESC is capable of handling;...

  • Page 6: Maintenance

    MAINTENANCE Here are some basic maintenance routines. After each day of operation we feel it’s best to remove the motor and fl ush it out with a moisture displacer and re-oil the bearings. You are going to need the following tools and supplies. 12mm open end wrench Bearing oil 10mm open end wrench...
  • Page 7 Place the motor in a rag or paper towel and spray a water displacer into the fi ttings on the water jacket as well as in the motor itself. After the motor is “pickled,” re-oil the motor bearings, wipe the motor down and reinstall it in the boat using the above instructions in reverse order.

  • Page 8: Replacement Parts

    GrimRacer 42x55 (AQUB9725) is about the AQUB9715 ..40 x 53 GrimRacer Metal Prop best overall prop for your Motley Crew. It is also advisable that AQUB9720 ..40 x 52 3-Blade GrimRacer Metal Prop you balance your propeller when it is new and check it for balance AQUB9725 .

Table of Contents