Press the flashing DSS/BLF Coverage button. You may press the DSS line button prior to lifting
o
the handset, which activates the speakerphone and answers the call.
The LED indications of the DSS line button are:
•
Solid red
•
Fast blinking red
•
Slow blinking red
3.16. Hotline/Warm-Line
With Hotline/Warm-Line operation configured, the IP Phone automatically calls the defined destination
when you take the handset off-hook or press the speaker button. The call initiates immediately, Hotline,
or after a delay of up to 10 seconds, Warm-Line. The later permits you the time to access another feature
or line as needed. Note that with Hotline configured, Speed dial, redial and other automated dialing
features will not operate.
Operation of this feature is automatic.
line in use remotely
Call appearance ringing for covered line
Remote call hold
9
IP8820 Broadworks IP Phone
User Guide
Dec. '08