12-3. Outdoor Unit
No.
Part name
Common
1. Detachment
procedure
2. Attachment
Procedure
NOTE
Wear gloves for this job.
Otherwise, you may injure your
hands on the parts, etc.
1) Stop operation of the air conditioner,
and turn off the main switch of the
breaker for air conditioner.
2) Remove the valve cover.
(screw 3 pcs.)
• After removing screw, remove the
valve cover pulling it downward.
3) Remove cord clamp (screw 3 pcs.)
and then remove connecting
cable.
4) Remove the upper cabinet.
(screw 5 pcs.)
• After removing screws, remove the
upper cabinet pulling it upward.
1) Attach the upper cabinet.
(screw 5 pcs.)
2) Perform cabling of connecting cable,
and attach the cord clamp.
Fix the cord clamp by tightening
•
the screws (screw 3 pcs.)
fitting 2 concave parts of the cord
clamp to each connecting cables.
3) Attach the valve cover.
(screw 3 pcs.)
Insert the upper part into the square
•
hole of the side cabinet, set hook
claws of the valve cover to square
holes (at two positions) of the main
unit, and attach it pushing upward,
– 105 –
FILE NO. SVM-13069
Remarks