Before attempting to connect, operate or adjust this product, please save and read the User's Manual completely. The style of the product shown in this User's Manual may be different from the actual unit due to various models. Safety instructions Always read the safety instructions carefully: ■...
Introduction The USB 3.0 to DisplayPort Adapter is a device which enables connection to second display device to a computer using USB 3.0 port. With this convenient design, it can connect up to 6 display devices to a computer without installing extra video cards.
Features ■ Add-on monitor, LCD or projector through a single USB 3.0 port hot-plug ■ Compliant with USB 3.0 Super Speed upstream connection ■ Supports High Resolution up to 2560x1600 pixels ■ Video streaming is supported up to 1080p ■ Extend and Mirror mode support ■...
Application Office workstation ■ View your large spreadsheets across two screens with display continuity ■ Multitask more effectively without overlapping windows ■ Edit on one screen while surfing the Internet information on the other On the road ■ Do multiple screen presentations without bringing another computer ■...
Package contents ■ USB 3.0 to DisplayPort Adapter ■ CD (Driver & User’s Manual) ■ Quick Installation Guide ■ USB Cable System requirements ® ® ® ■ Support Windows XP, Windows Vista, Windows ® and Windows Hardware requirements ■ The minimum requirements for the PC are: - With Single Core CPU at 1.2GHz or higher processor ®...
Page 8
■ To play DVD on the adapter-attached monitor, except the requirements above, the following requirements should also be met: - With dual core CPU at 2.0 GHz processor clock - The adapter screen resolution be set to 800x600 with 32bit color.
Parts and connection Parts DisplayPort connector (DP Connector) : Connect to a desired DP monitor. To connect different types of monitor, you may need a converter. Micro USB connector: Connect to an available USB connector on a computer.
Connection 1. Plug one end of DP cable into the adapter's DP connector, and the other end of DP cable into a DP connector of monitor. 2. Plug the micro USB connector into the adapter's micro USB connector and the other end into a PC.
Installation Caution: DO NOT connect the USB 3.0 to DisplayPort Adapter to a computer before installing the provided driver. Note that the following strings and screen shots shown on this user's manual may vary slightly from each operation. For Windows 7/ Windows 8 users ®...
Page 12
Note: If the AutoPlay does not appear automatically, locate and double-click on the Setup.exe file in the driver folder to launch the setup. Enter the administrator password and then click <Yes> to start the installation if a User Account Control dialog box appears.
Page 13
4. Be patient with the installation procedure, it may take a while. 5. Connect the USB 3.0 to DisplayPort Adapter to a computer after the driver installation is completed. For connection details, refer to the chapter of Parts and Connection. 6.
For Windows ® Vista users 1. Insert the supplied driver CD into a computer's CD/DVD- ROM. 2. Click <Run Setup.exe> to start the installation. Note: ● If the AutoPlay does not appear automatically, locate and double-click on the Setup.exe file in the driver folder to launch the setup.
Page 15
3. Click <I Accept> for the next step. 4. Be patient with the installation procedure, it may take a while. 5. Connect the USB 3.0 to DisplayPort Adapter to a computer after the driver installation is completed. For connection details, refer to the chapter of Parts and Connection.
Page 16
6. When the operating system detects the adapter, the reminder message will appear in the Windows System Tray. Note: Click <Yes> to restart or <No> to manually restart later, if a prompting to restart computer message appears. 7. To change the status of display mode, position the mouse anywhere on the Windows desktop, and then right-click to select <Personalize>.
For Windows ® XP users 1. Insert the supplied driver CD into a computer's CD/DVD- ROM. 2. Click <I Accept > for the next step. 3. Be patient with the installation procedure, it may take a while.
Page 18
Note: Click <Yes> to restart or <No> to manually restart later, if a prompting to restart computer message appears. 4. Connect the USB 3.0 to DisplayPort Adapter to a computer after the driver installation is completed. For connection details, refer to the chapter of Parts and Connection.
Verifying the driver To verify the driver of the adapter, follow the step below to open the Device Manager on Windows operating system. 1. Following the path as below to open the device manager ® Windows 8: My Computer\Computer(right click)\ Properties\Device Manager ®...
Using the adapter There are several ways to utilize the monitor attached on the adapter. The add-on monitor can be configured to use either “mirror mode”, “extended mode” or be the primary display as described in this section. Mirror mode: Duplicate the primary display and mirror to the add-on monitor(s).
Utility settings The supplied utility allows you to configure the display mode, screen rotation, screen resolution, and physical arrangement of your monitors. 1. Click < (utility icon) > in the Windows System Tray. Note: The may be hided in the Windows System Tray.
Page 22
Description of the settings Options Description DisplayLink Enable the Windows screen resolution page. Manager Check for Updates Check the latest driver and download if available. USB 3.0 to DisplayPort Adapter Screen Click to select an available resolution. Note Resolution that this function is invalid in mirror mode, as the resolution is defined as the resolution of the primary monitor.
Page 23
Options Description USB 3.0 to DisplayPort Adapter Fit to TV Adjust the size of Windows Desktop on the Note: This function works only when one add-on monitor is connected. Besides, this option will also only work in extended mode. The add-on monitor will change to the extended mode if selecting this option while in mirror mode.
Windows system configuration Position the mouse anywhere on your computer desktop, right-click and select <Screen Resolution> on ® ® 8, Personalize > Display Settings Windows 7/ Windows ® ® on Windows Vista or Properties > Settings on Windows Alternatively, click < (utility icon) >...
Extended mode 1. Refer to the Windows system configuration section to open the configuration page. 2. In the Display drop-down menu, select the option with the string similar to “DisplayLink Graphics Adapter”.
Page 26
3. Check the Multiple Displays > Extend these displays ® ® on Window 7/ Window 8, Extend the desktop onto ® this monitor box on Windows Vista or Extend my ® Windows desktop onto this monitor box on Windows 4. Click <OK> to confirm and close the settings screen. 5.
Mirror mode 1. Refer to the Windows system configuration section to open the configuration page. 2. In the Display drop-down menu, select the option with the string similar to “DisplayLink Graphics Adapter”. 3. Check the Multiple Displays > Duplicate these ®...
Be the primary monitor 1. Refer to the Windows system configuration section to open the configuration page. 2. In the Display drop-down menu, select the option with the string similar to “DisplayLink Graphics Adapter”. 3. Check the Make this my main display box on ®...
Using multiple adapters Up to 6 adapters can be connected to one computer simultaneously. To connect multiple adapters, install the drive as described in the Installation section and then connect the adapters to a computer. Note: Only the first connected adapter can be configured to extended mode and the others will be forced to mirror mode if using a low-end or poor conditional computer.
Uninstall the adapter and driver 1. Open the Control Panel > Programs > Programs and ® ® ® Features on Windows 7/ Windows 8/ Windows Vista, ® and Add or Remove Programs on Windows 2. Select <DisplayLink Graphic> and click <Uninstall or Remove>.
Specifications Host Interface USB 3.0 Video Interface DisplayPort Connectors Video output: DisplayPort connector Host upstream link: USB 3.0 Micro B type connector Connectivity Up to 6 adapters on a computer Power Mode Bus-power ® OS Support - Windows ® - Windows Vista ®...
Regulatory compliance FCC conditions This equipment has been tested and found to comply with Part 15 Class B of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received and include interference that may cause undesired operation.
Page 34
USB 3.0 to DisplayPort Adapter User's Manual SVR-H V1.0...