A.O. Smith Z6 User Manual page 13

RO change indicator
This indicates that the MIN-TECH, Silver Activated Post Carbon, SCMT filter and/or
ROmembrane needs to be replaced.
• RO change indicator glows when 10% life is remaining, indicating that it is time to
replace MIN-TECH, Silver Activated Post Carbon, SCMT filter and/or RO membrane.
• When MIN-TECH, Silver Activated Post Carbon, SCMT filter and/or RO membrane life
reaches its end, this indicator will start to blink continuously. The unit will not
function until MIN-TECH, Silver Activated Post Carbon, SCMT filter and/or RO
membrane are/is replaced.
• RO change indicator keeps blinking continuously with the buzzer beeping for
10 times every time the system is switched ON. The unit will not function until
MIN-TECH, Silver Activated Post Carbon, SCMT filter and/or RO membrane are/is
replaced.
Note: Call A. O. Smith Customer care centre to replace the
Carbon, SCMT filter and/or RO membrane.
SCPA change indicator
This indicates that the Sediment filter and/or Pre Carbon filter needs to be replaced.
• SCPA change indicator glows when 10% life is remaining, indicating that it is time to
replace Sediment filter and/or Pre Carbon filter.
• When Sediment filter and/or Pre Carbon filter life reaches its end, this indicator will
start to blink continuously and the unit will not function until Sediment filter and/or
Pre Carbon filter are/is replaced.
• SCPA change indicator keeps blinking continuously with the buzzer beeping for
10 times every time the system is switched ON. The unit will not function until
Sediment filter and/or Pre Carbon filter are/is replaced.
Note: Call A. O. Smith Customer care centre to replace the Sediment filter and/or Pre Carbon filter.
Temperature indicator
This indicates the temperature of water inside the hot water tank and displays the Error
codes incase of fault in the water purifier.
Note: Call A. O. Smith Customer care centre if you notice any Error messages (Refer page 27).
MIN-TECH, Silver Activated Post
09