Waeco PerfectView CAM16 Installation And Operating Manual page 29

_RV-16.book Seite 29 Freitag, 13. April 2007 2:33 14
PerfectView CAM16
– The location on the body where you wish to attach the housing must be rigid
enough to allow the housing holder to be tightly fastened.
Check beforehand that there is sufficient room for the drill head to come out on the
other side (see 2, page 4).
If you are not sure about the location you have chosen, consult the vehicle
manufacturer or dealer.
Tip!
We recommend greasing the threads of the bolts to prevent corrosion.
Installing the rear view video camera
29