Table of Contents
Advertisement
... Care and maintenance
Replacing the halogen light
Remove screw fuse for appliance or switch off
circuit breaker.
Fold down the glass panel.
A
Using a small screw driver, carefully remove the
A
ring.
Replace the defective halogen light with a bulb
A
of the same type (max. 20 watts).
Avoid touching the new halogen light with
bare hands. Use a soft, dry and grease-
free cloth.
Clean the ring and the glass.
A
Fit the ring and the glass back into the openings.
A
Fold the glass panel up again.
A
Put back screw fuse or switch on circuit breaker again.
A
16
Advertisement
Table of Contents
